Помогите с тонкой настройкой Mysql

General Statistics --------------------------------------------------
[--] Skipped version check for MySQLTuner script
[OK] Currently running supported MySQL version 5.1.41-log
[OK] Operating on 32-bit architecture with less than 2GB RAM

-------- Storage Engine Statistics -------------------------------------------
[--] Status: -Archive -BDB -Federated -InnoDB -ISAM -NDBCluster
[--] Data in MyISAM tables: 138M (Tables: 10)
[OK] Total fragmented tables: 0

-------- Performance Metrics -------------------------------------------------
[--] Up for: 3h 25m 32s (94K q [7.640 qps], 4K conn, TX: 338M, RX: 11M)
[--] Reads / Writes: 93% / 7%
[--] Total buffers: 176.0M global + 4.2M per thread (100 max threads)
[OK] Maximum possible memory usage: 594.8M (58% of installed RAM)
[OK] Slow queries: 0% (681/94K)
[OK] Highest usage of available connections: 70% (70/100)
[OK] Key buffer size / total MyISAM indexes: 128.0M/18.5M
[OK] Key buffer hit rate: 99.9% (23M cached / 19K reads)
[OK] Query cache efficiency: 72.3% (56K cached / 77K selects)
[!!] Query cache prunes per day: 24969
[OK] Sorts requiring temporary tables: 0% (12 temp sorts / 6K sorts)
[!!] Temporary tables created on disk: 46% (4K on disk / 10K total)
[OK] Thread cache hit rate: 95% (221 created / 4K connections)
[OK] Table cache hit rate: 69% (114 open / 165 opened)
[OK] Open file limit used: 1% (134/11K)
[OK] Table locks acquired immediately: 99% (28K immediate / 28K locks)

-------- Recommendations -----------------------------------------------------
General recommendations:
MySQL started within last 24 hours - recommendations may be inaccurate
When making adjustments, make tmp_table_size/max_heap_table_size equal
Reduce your SELECT DISTINCT queries without LIMIT clauses
Variables to adjust:
query_cache_size (> 32M)
tmp_table_size (> 16M)
max_heap_table_size (> 16M)

SLOW QUERIES
The slow query log is enabled.
Current long_query_time = 10.000000 sec.
You have 696 out of 96197 that take longer than 10.000000 sec. to complete
Your long_query_time seems to be fine

BINARY UPDATE LOG
The binary update log is NOT enabled.
You will not be able to do point in time recovery
See http://dev.mysql.com/doc/refman/5.1/en/point-in-time-recovery.html

WORKER THREADS
Current thread_cache_size = 8
Current threads_cached = 7
Current threads_per_sec = 0
Historic threads_per_sec = 0
Your thread_cache_size is fine

MAX CONNECTIONS
Current max_connections = 100
Current threads_connected = 1
Historic max_used_connections = 70
The number of used connections is 70% of the configured maximum.
Your max_connections variable seems to be fine.

No InnoDB Support Enabled!

MEMORY USAGE
Max Memory Ever Allocated : 453 M
Configured Max Per-thread Buffers : 418 M
Configured Max Global Buffers : 160 M
Configured Max Memory Limit : 578 M
Physical Memory : 1011 M
Max memory limit seem to be within acceptable norms

KEY BUFFER
Current MyISAM index space = 18 M
Current key_buffer_size = 128 M
Key cache miss rate is 1 : 1253
Key buffer free ratio = 81 %
Your key_buffer_size seems to be fine

QUERY CACHE
Query cache is enabled
Current query_cache_size = 32 M
Current query_cache_used = 26 M
Current query_cache_limit = 1 M
Current Query cache Memory fill ratio = 81.44 %
Current query_cache_min_res_unit = 4 K
However, 3564 queries have been removed from the query cache due to lack of memory
Perhaps you should raise query_cache_size
MySQL won't cache query results that are larger than query_cache_limit in size

SORT OPERATIONS
Current sort_buffer_size = 1 M
Current read_rnd_buffer_size = 1 M
Sort buffer seems to be fine

JOINS
Current join_buffer_size = 1.00 M
You have had 0 queries where a join could not use an index properly
Your joins seem to be using indexes properly

OPEN FILES LIMIT
Current open_files_limit = 11095 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine

TABLE CACHE
Current table_open_cache = 256 tables
Current table_definition_cache = 256 tables
You have a total of 10 tables
You have 114 open tables.
The table_cache value seems to be fine

TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 16 M
Of 5748 temp tables, 46% were created on disk
Perhaps you should increase your tmp_table_size and/or max_heap_table_size
to reduce the number of disk-based temporary tables
Note! BLOB and TEXT columns are not allow in memory tables.
If you are using these columns raising these values might not impact your
ratio of on disk temp tables.

TABLE SCANS
Current read_buffer_size = 1 M
Current table scan ratio = 1260 : 1
read_buffer_size seems to be fine

TABLE LOCKING
Current Lock Wait ratio = 1 : 2105
You may benefit from selective use of InnoDB.